Minitom
Instruction Manual
3
Intended use
For professional automatic materialographic cutting of materials,
primary non-metals, for further materialographic inspection and only
to be operated by skilled/trained personnel. The machine is only
designed to be used with Struers consumables specially designed
for this purpose and this type of machine.
Cutting of materials other than solid materials suitable for
materialographic studies. In particular, the machine must not be
used for any type of explosive and/or flammable material, or
materials which are not stable during machining, heating or
pressure.
The machine may not be used with cut-off wheels which are not
compatible with the machine requirements (e.g. abrasive cut-off
wheels or toothed cut-off wheels).
The machine is for use in a professional working environment (e.g. a
materialographic laboratory).
Minitom
READ the instruction manual carefully before use.
Keep a copy of the manual in an easy-to-access place for future
Do not use the machine for:
To Next Page
Loading...
