Struers Minitom - 7 Technical Data

Minitom
Instruction Manual
34
7. Technical Data
Subject Specifications
Cutting
Motor 38 W
Power – constant
Power – intermittent
Power
max
Current spikes
0.075 A
0.125 A
0.2 A
0.073 A
Cut-off wheels 100-127 mm (4"-5") dia.
Output axle Rotational speed: 100-420 rpm
Diameter: 12.7 mm (2"
Cut-off wheel diameter: 100-127 mm (4"-5")
Arm Balancing specimen holder with specimen: up to 200g
Cutting pressure: 0-350 g
Axial movement: 0-25 mm
Cooling tank Volume: 250 ml
Noise level
1
L
pA =
58 dB(A) (measured value)
Uncertainty K = 4 dB
Measurements made in accordance with EN ISO 11202
Supply
Voltage / frequency: 100-240 V, 50-60 Hz
Dimensions
Including action radius of
the arm
Width: 280 mm
Depth: 400 mm
Height: 400 mm
Weight: 8 kg
EU Directives
Please refer to the Declaration of Conformity
Operating
environment
Surrounding
temperature
5 – 40°C / 41 – 104°F (operation)
0 – 60°C / 32 – 140°F (storage)
Humidity < 95% RH non-condensing (operating)
< 90% RH non-condensing (storage)
1
The figures quoted are emission levels and are not necessarily safe working
levels. While there is a correlation between the emission and exposure levels, this
cannot be used reliably to determine whether or not further precautions are
required. Factors that influence the actual level of exposure of the workforce include
characteristics of the work room, the other sources of noise, etc., i.e. the number of
machines and other adjacent processes. Also, the permissible exposure level can
vary from country to country. This information, however, will enable the user of the
machine to make a better evaluation of the hazard and risk.