www.stryker.com 1025-009-001 REV E 25
USING THE OPTIONAL SCALE SYSTEM BATTERIES
Note
To avoid completely draining the batteries and having the optional scale system shut down, replace the batteries whenever
only one of the charge indicator bars on the display is black (see “Operating the Optional Scale System” on page
24).
Remove the two Phillips head screws holding the battery compartment cover on the display assembly.1.
Replace all four AA batteries, being sure to install the positive and negative poles as indicated on the battery holder. 2.
Standard alkaline batteries are recommended. Do not mix old and new batteries or mix different types of batteries.
Properly dispose of the old batteries in accordance with local regulations.
Reinstall the screws and the cover. 3.
If the display is flashing “Lo Batt”, the batteries are drained and the scale system is disabled. Replace the batteries with
four new AA batteries as described above.
Return To Table of Contents
Stretcher Operation
To Next Page
Loading...
Need help?
General
