What to do if the Stryker 1069 jack will not pump up and the actuator rod may or may not move?
If the Stryker Medical Equipment jack does not pump up, and the jack actuator rod may or may not move, remove the excess air (vacuum) in the hydraulic system.
What to do if the Stryker 1069 jack will not pump up but the jack actuator rod does move?
If the Stryker Medical Equipment jack won't pump up, but the jack actuator rod does move when the pump pedal is activated, replace the check valve.
What to do if the Stryker 1069 Medical Equipment jack will not pump up and the jack actuator rod does not move?
If the Stryker Medical Equipment jack will not pump up and the jack actuator rod does not move, close the needle valve. If the jack will now pump up, replace the release valve. If the jack still will not pump up after closing the needle valve, replace the poppet valve.
How to fix Stryker 1069 jack that will not raise to full height?
If the Stryker Medical Equipment jack will not raise to full height, add hydraulic fluid and check for leaks.
General| Brand | Stryker |
|---|---|
| Model | 1069 |
| Category | Medical Equipment |
| Language | English |
Technical details and operational parameters of the stretcher, including dimensions and capacity.
Details the limited warranty coverage, terms, and conditions for the product.
Detailed procedures for cleaning surfaces and specific materials of the equipment.
A comprehensive checklist for performing regular maintenance checks on the stretcher.
Step-by-step guide for replacing the caster assemblies on the stretcher.
Common hydraulic system problems and their corresponding solutions.
To Next Page
