5400-052-700-EN Rev-D EN
www.stryker.com 5
5 Supplied Components
This table identifies supplied components with the
purchase of REF 5400-052-000.
COMPONENT REF
CORE 2 Console 5400-052-010
Console Power Cord 0996-851-XXX
Symbol Definition Chart 0036-716-000
Software License Addendum 5400-052-704
Instructions For Use (IFU) 5400-052-700
NOTES:
▪ If any component is missing or damaged, contact
Stryker for assistance.
▪ For additional power cord information, see Appendix E:
Power Cords.
6 For Use With
WARNING: Only use Stryker-approved equipment,
unless otherwise specified.
This table identifies Stryker-approved equipment intended
to be used with the console to obtain a safe combination.
NOTE: This equipment is sold separately and may not
be available in all markets. To order equipment, contact
Stryker.
EQUIPMENT REF
Accessories
Standard Cord (Keyed) 5100-004-000
Irrigation Pole 5100-050-028
CORE Heavy Duty Power Pack 5400-500-000
Mill Cable 5400-704-000
ES6 Handpiece Cord 6292-004-000
Irrigation Cassettes
CORE ESSx/Hummer Irrigation
Cassette
5290-075-000
Disposable Irrigation Cassette 5400-050-001
Dual Disposable Irrigation Cassette 5400-050-002
Handswitches
TPS Universal Handswitch 5100-009-000
CORE Universal Handswitch 5400-009-000
CORE UHT Drill Handswitch 5400-111-000
CORE Saber Handswitch 5400-121-000
CORE Sumex Handswitch 5400-131-000
RemB Electric Handswitch 6400-009-000
EQUIPMENT REF
Footswitches
TPS Two-Pedal 0275-701-400
TPS Uni-Directional Footswitch 5100-007-000
TPS Footswitch 5100-008-000
NSE Footswitch 5400-007-000
Motors
TPS Small Joint Shaver 0275-601-500
Formula Shaver Foot Control 0375-701-500
Formula Shaver Hand Control 0375-704-500
Formula 180 0375-708-500
TPS Micro Oscillating Saw 5100-031-000
TPS Micro Driver 5100-088-000
TPS XL Oscillating Saw 5100-131-000
Hummer 4 Handpiece 5290-601-100
CORE ESSx Handpiece 5290-601-200
CORE Micro Drill 5400-015-000
CORE Oscillating Saw 5400-031-000
CORE Sagittal Saw 5400-034-000
CORE Reciprocating Saw 5400-037-000
CORE Universal Driver 5400-099-000
CORE U-Drill 5400-100-000
CORE UHT Drill 5400-110-000
CORE Saber Drill 5400-120-000
CORE Modified Saber Drill 5400-120-000S1
CORE Sumex Drill 5400-130-000
CORE Sumex MS1 5400-130-000S1
CORE Impaction Drill 5400-300-000
CORE Mill 5400-700-000
Pi Drive Motor 5407-100-000
Pi Drive Plus Motor 5407-300-000
S2 Drill 5450-400-000
ES6 Single Trigger Rotary Handpiece 6293-000-000
ES6 Dual Trigger Rotary Handpiece 6295-000-000
ES6 Reciprocating Saw 6296-000-000
ES6 Sternum Saw 6297-000-000
ES6 Sagittal Saw 6298-000-000
ES6 Precision Oscillating Tip Saw 6299-000-000
RemB Electric Micro Drill 6400-015-000
RemB Electric Oscillating Saw 6400-031-000
RemB Electric Sagittal Saw 6400-034-000
RemB Electric Reciprocating Saw 6400-037-000
RemB Electric Wiredriver 6400-062-000
RemB Electric Universal Driver 6400-099-000
0000221359, Rev. D Effective Date: Jun 1, 2017 10:00:55 AM
Print Date: Jun 08, 2017 08:54:46 AM
To Next Page
Loading...
