Stryker Isolibrium 2971 - Page 53

EENN
www.stryker.com 2971-109-0 01 REV B 1-45
Service
Power supply replacement (Continued)
9. Remove and discard the power supply (AY) (Figure 1-20 on page 1-44).
10. Reverse steps to reinstall.
Notes
• During reinstall, make sure to align the Velcro® patches.
• After installation, remove the zipper pull tool or equivalent from the zipper.
• Make sure that the watershed covers the zipper.
• Do not dispose of as unsorted municipal waste. See your local distributor for return or collection systems
available in your country.
11. Verify proper operation before returning the product to service.