IInnssttaalllliinngg tthhee bbaacckkrreesstt ssttoorraaggee ppoouucchh
CCAAUUTTIIOONN
• Do not load the backrest storage pouch above the safe working load of 20 lb (9 kg).
• Do not allow the storage pouch to interfere with the operation of the retractable head section.
To install the backrest storage pouch (Figure 35):
1. Insert each strap through a hole in the backrest skin.
2. Mount the pouch flat against the backrest.
3. Secure the backrest storage pouch to the cot with the VVeellccrroo straps.
FFiigguurree 3355 –– BBaacckkrreesstt ssttoorraaggee ppoouucchh
IInnssttaalllliinngg tthhee ooppttiioonnaall hheeaadd eenndd ssttoorraaggee ffllaatt
WWAARRNNIINNGG -- Do not allow the head end storage flat (if equipped) to interfere with the operation of the retractable head
section, safety bar, or vehicle safety hook.
CCAAUUTTIIOONN -- Do not load the head end storage flat above the safe working load of 40 lb (18 kg).
To install the head end storage flat (Figure 36):
1. Install the VVeellccrroo® straps (A) near the pneumatic cylinder and around the cross tube (C) of the retractable head section.
2. Buckle the restraint straps (B) around the outer rails of the retractable head section.
EN 42 6086-209-001 Rev F.2
To Next Page
Loading...
Need help?
General
