Stryker S3 Quick Start Guide

Nurse Controls: i Bed
™
Awareness (optional)
The iBed Awareness is a bed monitoring system that allows you to monitor the brakes, siderail
position, bed exit, low bed height and 30 degree HOB.
To Arm
Set the desired bed configuration.
Push and release the i BED key (all three green lights on
the footboard will illuminate).
If one of the parameters is changed, an amber light on the
footboard will flash indicating the bed is no longer in the
prescribed position. The digital display and nurse dash-
board will indicate what has been altered.
To Disarm
To deactivate iBed Awareness, push and hold the iBED (1)
key. The footboard lights will turn off.
1
1
2
1
2
2

Stryker S3 Specifications

General

Weight Capacity	500 lbs (227 kg)
Maximum Patient Weight	500 lbs (227 kg)
Bed Frame Material	Steel
Type	Hospital Bed
Bed Width	35 inches (89 cm)
Caster Size	5 inches (12.7 cm)
Electrical Requirements	120 VAC, 60 Hz
Width	35 inches (89 cm)
Power Requirements	120 VAC, 60 Hz
Power Backup	Battery backup available
Accessories	IV pole
Siderails	Yes