Stryker S3 Quick Start Guide

Emergency CPR
Release
The CPR release is located
under the sleep deck near the
top of the head end of the bed
on both sides.
To Activate
Squeeze one of the two
release handles, located
beneath the red CPR Release
labels, and the Fowler can be
quickly guided down to a flat
position.
For Your Safety
A CPR compression board
(opt i o n a l) can be found on the
back of the headboard for
immediate use if a crash cart is
not available.

Stryker S3 Specifications

General

Weight Capacity	500 lbs (227 kg)
Maximum Patient Weight	500 lbs (227 kg)
Bed Frame Material	Steel
Type	Hospital Bed
Bed Width	35 inches (89 cm)
Caster Size	5 inches (12.7 cm)
Electrical Requirements	120 VAC, 60 Hz
Width	35 inches (89 cm)
Power Requirements	120 VAC, 60 Hz
Power Backup	Battery backup available
Accessories	IV pole
Siderails	Yes