iBed
®
Awareness Functionality
s Monitors status conditions of the patient and produces an
alert if the state had changed.
s When the system is turned on, it monitors each of the siderail
positions and brake automatically.
s Can also be set to monitor Low Bed Height and Chaperone
Bed Exit System.
s A light bar, located on the footboard, will illuminate and
indicate the state of the iBed Awareness system. Lights
located on each side of the bed, near the footboard will
behave identical to the center light.
Features
s When the iBed Awareness system is on, the light bar turns
GREEN.
s If an alert state is triggered, the light bar will change to
flashing AMBER. This indicates Indicates the bed has left the
original configuration.
s The display screen on the footboard control will display the
details of the alert state.
The iBed Awareness system is intended to serve as a secondary
monitoring system, informing the operator via a visual or audible alert
when a preset condition changes.
The optional iBed Awareness system only indicates the siderail
position, it does NOT indicate if the siderail is locked. It is the
caregiver’s responsibility to ensure that the siderails are locked after
every move and also before leaving a patient in the room.
The optional iBed Awareness system indicator lights are only an aid
to the caregiver but in no way replace the caregiver’s responsibility of
checking on patients. Caregivers should not rely on the lights to
perform their duties.
Before arming the optional iBed Awareness system, the nurse must
physically verify that siderails are locked.
17
Always refer to the package insert, product labeling and/or operations maintenance manuals before using any Stryker product.
17
To Next Page
Loading...
Need help?
General
