Ease of Use: Siderail Positions
To facilitate siderails down, press the yellow release button (do not press the yellow release button to
raise).
Grasp the top of the rail, pull outward and swing it up to full height. When the siderail is raised it does
not lock in the intermediate position.
To utilize the intermediate position, push in the yellow release handle and rotate the siderail until it
locks in the intermediate position.
To fully lower the siderails, push the release handle again and rotate the siderail until it is completely
lowered.
Be sure the siderail is locked securely into position. Siderails are not intended to keep patients from exiting the bed. They are designed to keep patients from inadvertently rolling off the bed. Proper restraint
methods shoudl be utilized to ensure the patient remains in the bed. The siderails are not intended to be used as a push device.
Always refer to the package insert, product labeling and/or operations maintenance manuals before using any Stryker product.
8
To Next Page
Loading...
Need help?
General
