E/0310/50/15
Actual Values
Display is alternating between actual value "temperature" and actual value "humidity"
in 2- second- intervals.
Humidity is shown in % r.h. Actual value "humidity" is marked by an H.
Temperatures are shown in °C (marked by C) or °F (marked by F). This can be chosen
by DIP- switch 4 at any time.
Resetting an alarm is only possible in this menu item.
Temperature Setpoint
"Temperature" setpoint is shown in this item. Unit of temperature is °C or °F.
Humidity Setpoint
"Humidity " setpoint is shown in this item.
High Temperature Limit value
If the actual value "temperature " is rising up to this point, an alarm "Temperature too
high" is released.
Low Temperature Limit value
If the actual value "temperature" is going down to this point, an alarm "Temperature
too low" is released.
High Humidity Limit value
If the actual value "humidity" is rising up to this point, an alarm "Humidity too high" is
released.
Low Humidity Limit value
If the actual value "humidity" is moving down to this point, an alarm "Humidity too low"
is released.
Item
1
2
3
4
5
6
7
To Next Page
Loading...