16 EN/39B/06.2018 © STULZ SpA – all rights reserved
SAL
Except differently agreed, standard packing of internal and external unit is composed of:
• Pallet under the unit, fixed to its lower frame;
• Protective box above the unit.
The standard packing of the free cooling module is a protective box which contains the unit.
Following information can be found on the packing:
• STULZ logo;
• Unit code;
• Accessories put in the packing;
• Warning symbols.
INFORMATION
With ex-works delivery conditions, carrier is the sole responsible for any damage caused during
transport. STULZ is not responsible for damages to the goods caused by the carrier, but it will
do everything in its power to assist clients on those situations.
If delivery conditions are not ex-works, in case of damage, please follow instructions either on
transport document or on www.stulz.it web site.
This product cannot be returned without prior approval of STULZ. For any assistance, please
consult your local STULZ partner.
External unit
To Next Page
Loading...
