Sub-Zero Built-In Refrigeration User Manual

Level the Unit
O
nce the unit is in position, extend the front leveling legs
down by turning the legs clockwise to adjust the height.
The rear height adjustment can be made from the front of
the base. Use a
3
/8" socket to adjust the rear rollers. Turn
the
3
/8" hex bolt clockwise to raise the unit or counter-
clockwise to lower it.
When the unit is leveled properly, or squared off, door
and/or drawer adjustments are less likely to be necessary.
Refer to the illustration below for location of the rear roller
base adjustment.
IMPORTANT NOTE: Be sure to reference leveling of the
unit to the floor and not to surrounding cabinetry. This
could affect the operation of the unit, such as door
closing.
Built-In Installation 19
subzero.com
F
RONT
L
EVELING LEG
REAR
A
DJUSTMENT
Rear roller base adjustment.

Sub-Zero Built-In Refrigeration Specifications

General

Brand	Sub-Zero
Model	Built-In Refrigeration
Category	Refrigerator
Language	English