FORESTER (NA) A8050BE–A (ENG.)
3
Instruments and controls
3-3
– CONTINUED –
n Automatic transmission vehicles:
HS0124HS0123
The key can be turned from “ACC” to “LOCK” only when the selector
lever is in the “P” position.
n Manual transmission vehicles:
HS0125
1
2
The key can be turned from “ACC” to “LOCK” only when the key is
pushed in while turning it.
B ACC
In this position the electrical accessories (radio, accessory power
socket, etc.) can be used.
B ON
This is the normal operating position after the engine is started.
To Next Page
Loading...
