FORESTER (NA) A8050BE–A (ENG.)
4-6
J Heater operation
B Defrosting or defogging the windshield
HS0072
To direct warm air to the windshield and front door windows:
1. Set the air inlet selection lever to the “
” position.
2. Set the air flow control dial to the “
” position.
3. Turn the temperature control dial all the way to the right.
4. Set the fan speed control lever to the highest speed.
NOTE
Warm air also comes out from the right and left air outlets. To
stop warm air flow from these outlets, turn the corresponding
thumb-wheel to the “
” position.
To Next Page
Loading...
