FORESTER (NA) A8050BE–A (ENG.)
7
Starting and operating
7-15
– CONTINUED –
J Selector lever
OM-H0149
Release button
With the brake pedal
depressed, shift while
pressing the button in
Shift while pressing
the button in
Shift without pressing
the button
HS0129
The selector lever has seven positions.
The release button must be pushed to select the “P”, “R”, or “2” posi-
tions.
B P (Park)
This position is for parking the vehicle and starting the engine.
In this position, the transmission is mechanically locked to prevent the
vehicle from rolling freely.
When you park the vehicle, first set the parking brake fully, then shift
into the “P” position. Do not hold the vehicle with only the transmis-
sion.
A shift interlock function is employed in the automatic transmission
system to ensure safe starting of the vehicle.
To shift the selector lever from the “P” to the any other position, you
have to depress the brake pedal fully then push the release button on
the selector lever when the ignition switch is in the “ON” position. This
prevents the vehicle from lurching when it is started.
If the shift lever does not move from the “P” position with the brake
pedal depressed and the release button pushed in, refer to the “Shift
lock release” section in chapter 3.
To Next Page
Loading...
