Subaru 2002 Forester - High Mount Stop Light

FORESTER (NA) A8050BE–A (ENG.)
11
Maintenance and service
11-61
– CONTINUED –
J Spot light
HSA006BA
1. Remove the lens by prying the edge of the lens with a regular screw-
driver.
2. Remove the plate by removing a mounting screw.
3 Pull the bulb out of the socket. Install a new bulb.
4. Reinstall the plate and the lens.
J High mount stop light
OM-H0355
1. Remove the mounting screw covers by prying on the edge with a
screwdriver.
2. Remove the mounting screws using a phillips screwdriver and then
remove the high mount stop light cover.
3. Pull the bulb out of the socket. Install a new bulb.