FORESTER (NA) A8050BE–A (ENG.)
4-14
HS4004BB
3. Insert the front filter assembly in the cooling unit, then install the
rear filter assembly.
NOTE
D Hold the filter tabs to facilitate installation.
D The passenger compartment side of each filter is marked with
arrows (indicating “UP” and the direction of air flow). Ensure the
arrows point in the correct directions.
D Ensure each filter assembly’s tongues and grooves fit the cor-
responding cooling unit and matching filter tongues and grooves.
HS4005BB
4. Reinstall the cover and secure it using the clips.
NOTE
Ensure no air leaks from the cooling unit through the cover.
To Next Page
Loading...
