FORESTER (NA) A8050BE–A (ENG.)
5
Audio
5-35
– CONTINUED –
B How to insert a CD(s)
n Inserting a CD
1. Press “LOAD” button
O. If the magazine in the player has an idle
position where you can insert a disc, the “DISC” indicator associated
with the idle position will blink.
If no indicator blinks, it means that there is no idle position in the mag-
azine.
2. As soon as the “DISC” indicator begins to blink, the “IN” will ap-
pear on display for a period of 15 seconds. Insert a disc during the
period. The disc will be then automatically drawn in, and the player
will begin to play back the first number of the disc.
D To insert more discs in succession, repeat Steps 1 and 2. The
magazine will be loaded with discs in the ascending order of position
number.
If you do not insert any disc in 15 seconds after you have pressed the
“LOAD” button, the player will begin to play back the first number of
the last disc you have inserted.
D The disc indicator steadily lights up if a disc is already inserted in
the corresponding position of the magazine.
D While the player is in the loading mode, if you press any of the oth-
er mode buttons “FM”
2, “AM” 1 and “TAPE” E, the player will enter
the standby mode. Press the “CD” button
S to start playback.
n Inserting a disc in a desired position
1. Press the “LOAD” button. If the magazine in the player has an idle
position where you can insert a disc, the “DISC” indicator associated
with the idle position will blink.
The positions in the magazine the indicator of which steadily lights up
are already loaded with discs.
2. Press the “DISC SELECT” button
J at the position where you want
to insert a disc. The associated “DISC” indicator will blink, and the
“IN” will be displayed.
3. If you insert a disc during the 15-second period while the “IN” is on
display, the disc will be automatically drawn in, and the player will
start playback of the disc, beginning with the first number.
D To insert more discs in succession, repeat Steps 1 and 2.
To Next Page
Loading...
