FORESTER (NA) A8050BE–A (ENG.)
6
Interior equipment
6-17
– CONTINUED –
B Using the cover
HS6019BA
To extend the cover, pull the end of the cover out of the housing, then
insert its hooks into the catches as shown. To rewind it, unhook it from
the catches and it will rewind automatically. You should hold on to the
cover and guide it back into the cover housing while it is rewinding.
B To remove the cover
HS6020CA
1. Rewind the cover.
2. To take it off the retainer, lift it out.
3. Store the cover housing in the cargo area.
To install the luggage cover, insert both ends of the cover housing into
the retainers.
To Next Page
Loading...
