FORESTER (NA) A8050BE–A (ENG.)
11
Maintenance and service
11-51
– CONTINUED –
HSB011BBHS0207
Fuse puller
4. Pull out the fuse with the fuse puller. The fuse puller is stored in the
main fuse box cover in the engine compartment.
5. Inspect the fuse. If it has blown, replace it with a spare fuse of the
same rating. The spare fuses are stored in the main fuse box cover in
the engine compartment.
6. If the same fuse blows again, this indicates that its system has a
problem. Contact your SUBARU dealer for repairs.
B Main fuse box (in the engine compartment)
1. Turn the ignition switch to the “LOCK” position and turn off all elec-
trical accessories.
2. Open the engine hood.
3. Remove the main fuse box cover.
4. Determine which fuse may be blown. The fuse box cover and
“Fuse and circuits” section in chapter 12 in this manual show the cir-
cuit for each fuse.
To Next Page
Loading...
