FORESTER (NA) A8050BE–A (ENG.)
1-20
head rest.
HB1033CA
2. After confirming that the webbing is not twisted, insert the connec-
tor (tongue) attached at the webbing end into the buckle on the right-
hand side until a click is heard. If the belt stops before reaching the
buckle, return the belt slightly and pull it out more slowly. If the belt
still cannot be unlocked, let the belt retract slightly after giving it a
strong pull, then pull it out slowly again.
HB1034BA
3. Insert the center seatbelt tongue plate in the center seatbelt buckle
marked “CENTER” on the left-hand side until it clicks. To make the lap
part tight, pull up on the shoulder belt. And place the lap belt as low
as possible on your hips, not on your waist.
To Next Page
Loading...
