2. Operate the “ ” or “ ” switch to
select the “Top Display” item. Then push
the
button.
3. Push the button once more.
4. Select an item by operating the “ ” or
“
” switch. Then push the button.
5. Select “Set” by operating the “ ”
switch, and confirm the setting by pushing
the
button.
6. The system will notify you that the
setting is complete.
! Fuel consumption screen setting
1. Perform the preparation steps accord-
ing to “Preparation for screen settings”
F3-66.
Instruments and controls/Multi function display
– CONTINUED –
3-67
To Next Page
Loading...
