Instruments and controls/Multi function display
2. Operate the “ ” or “ ” switch to
select the “Cons” item. Then push the
button.
3. Push the button once more.
4. Select the displayed configuration by
operating the “
” or “ ” switch. Then
push the
button.
5. Select “Set” by operating the “ ”
switch, and confirm the setting by pushing
the
button.
6. The system will notify you that the
setting is complete.
! Economy history setting
1. Perform the preparation steps accord-
ing to “Preparation for screen settings”
F3-66.
3-68
To Next Page
