WARNING
If you have an implanted pacemaker
or an implanted defibrillator, per-
form the procedure “By operating
the driver’s door” F2-20 to disable
the keyless access function. If you
perform the procedure “By operat-
ing the access key” F2-19, the
operation of an implanted pace-
maker or implanted defibrill ator
may be affected by the radio waves
from the transmitter antenna.
NOTE
. The locking and unlocking function
by the remote keyless entry system is
not disabled.
. The setting can also be changed at
SUBARU dealers. For more de tails,
contact a SUBARU dealer.
. To start the engine while the func-
tions are disabled, perform the proce-
dure desc ribed in “Starting engine”
F9-19.
. We recommend that you disable the
keyless access functions under the
following conditions.
– When the vehicle is not going to
be used for an extended period of
time
– When the keyless access func-
tions are not going to be used
! Disabling functions
! By operating the access key
If you have registered a PIN code for PIN
Code Access, you can disable the keyless
access function by operating the access
key. For details about registering a PIN
code, refer to “Registering a PIN code”
F2-22.
1. Open the driver’s door.
2. Rotate the lock lever forward.
3. Press and hold the “ ” button and
“
” button on the access key simulta-
neously for more than 5 seconds.
A chirp sound will be heard, and the
function will be disabled.
Keys and doors/Keyless access with push–button start system
– CONTINUED –
2-19
To Next Page
Loading...
