Function settings
A SUBARU dealer can change the settings of the functions shown in the following table to meet your personal requirements. Contact
the nearest SUBARU dealer for details. Furthermore, some useful function settings are available using the multi information display.
For details, refer to “Menu screens” F3-41.
Item Function Possible settings Default setting Page
Alarm system Alarm system Operation/Non-operation Operation 2-29
Monitoring start delay time
(after closing doors)
0 seconds/30 seconds 30 seconds 2-30
Impact sensor operation (only
models with shock sensors
(dealer option))
Operation/Non-operation Non-operation 2-33
Map light/Dome light/Cargo
area light illumination
ON/OFF OFF 2-29
Keyless access with push-
button start system
*1
Audible signal
*2
ON/OFF ON 2-18, 2-47, 3-45
Audible signal volume
*3
Level 1 to 7 Level 5 2-18, 3-25, 3-45
Hazard warning flasher ON/OFF ON 2-18, 3-45
Door unlock selection (driver’s
door unlock)
Driver’s door only/All doors Driver’s door only 2-18, 3-45
Door unlock selection (rear
gate unlock)
Rear gate only, All doors Rear gate only
Remote keyless entry system Audible signal
*2
ON/OFF ON 2-25, 2-27,
2-47, 3-45
Audible signal volume
*3
Level 1 to 7 Level 5 2-25, 2-27, 3-45
Hazard warning flasher ON/OFF ON 2-25, 2-27, 3-45
Key lock-in prevention Key lock-in prevention Operation/Non-operation Operation 2-9
– CONTINUED –
27
To Next Page
Loading...
