Starting and operating/BSD/RCTA
CAUTION
To ensure correct operation of the
BSD/RCTA, observe the following
precautions.
. Always keep the bumper surface
near the radar sensors clean.
. Do not affix any stickers or other
items on the bumper surface
near the radar sensors. For de-
tails, consult your SUBARU deal-
er.
. Do not modify the bumper near
the radar sensors.
. Do not paint the bumper near the
radar sensors.
. Do not expose the bumper near
the radar sensors to strong im-
pacts. If a sensor becomes mis-
aligned, a system malfunction
may occur, including the inability
to detect vehicles entering the
detection areas. If any strong
shock is applied to the bumper,
be sure to contact your SUBARU
dealer for inspection.
. Do not disassemble the radar
sensors.
NOTE
If the radar sensors require repair or
replacement, or the bum per are a
around the radar s ensors requires
repair, paintwork or replacement, con-
tact your SUBARU dealer for assis-
tance.
7-62
To Next Page
Loading...
