Suburban Dynaline 3 - ADDITIONAL FEATURES AND OPERATION; Air Vent, Filter, and Gas Connection; Room Discharge, Controls, and Ignition

Suburban Dynaline 3 A&E Manual 12/2016 Rev.1
39
Tangential
Blower Wheel:
Spans the length of the
heating chamber and evaporator
coil. Air flow is uniform over the
system components, enhancing
air distribution performance
and system efficiency.
Electrical Components:
Located on the indoor side
of the wall, they’re protected
from the weather.
Ignition:
The standard in gas heating,
an electronically controlled,
hot surface ignites the burner
without standing pilot lights.
Gas is conserved and
safety is ensured.
Room Air Discharge:
An attractive, durable grille
constructed of extruded
aluminum directs air laterally.
Return Air Filter:
No tools are needed to install
or remove the permanent
electrostatic filter construct-
ed of washable media.
Unit Controls:
Each unit can be controlled
by a built-in thermostat or
reprogrammed to operate
from an optional
wall thermostat.
Air Vent:
The manually-operated lever
allows entry of 70 CFM
of outside air into
the comfort area.
Gas Connection
(Inside or Outside):
Available for Natural or
LP gas, thus saving the cost
of field conversion. Optional
2-lb. Natural gas regulator
is available.