Suburban Dynaline 3 A&E Manual 12/2016 Rev.1
5
Average unit cost of energy for
residential energy sources 2013
TYPE COST
Electricity 12.1¢ / kwh
Nat. gas $0.987 / therm
No. 2 heat oil $3.969 / gallon
Propane $2.69 / gallon
1 kwh = 3,412 BTU
1 therm = 100,000 BTU
1 gallon oil = 138,690 BTU
1 gallon propane = 91,333 BTU
Energy Information Agency
Table 2
Suburban Gas Heating and Electric Cooling
will save money in the long run.
The Suburban Dynaline
™
3 is a Packaged Terminal Air Conditioner
(PTAC) that combines economical gas heating and high-efficiency
electric cooling in one compact unit for zone temperature room-by-
room control. By comparing the operating costs of Dynaline 3 to
heat pumps or electric resistance heat, a savings of hundreds of dol-
lars per room every year can be achieved.
The Dynaline
™
3 Difference
* Bin Hours are the number of hours of operation per year at the mid-point temperature specific to a geographical
location. The BIN hours are derived from historical weather data.
For example, at a location with 7,023 heating BIN hours,
such as Syracuse, NY, with a 2º design temperature, the cost to
heat with Dynaline 3 can save 80% in utility costs compared to
electric resistance. When compared to heat pumps, Dynaline 3
can save 66%. For a building with 60 PTACs, Dynaline 3 can
save over $77,000 in utility costs in one year!
Annual Annual
heating cost heating cost
Kw Hours per room for 60 rooms
Electric Heat 10,555 $1,600.23 $96,013.80
Heat Pump 5,912 $896.23 $53,773.80
Therms
Gas Heat 455 $306.90 $18,414.00
Location Example Syracuse, NY
Heating BIN hours 7,023
Heat load 13,000
Outside design temperature 2º
Inside design temperature 70º
Number of rooms 60
Heating correction factor 0.66
Cost of electricity $0.1516/
kW hours
Cost of gas $0.5637/
THERMS
HEAT
PUMP
DYNALINE 3
Dynaline
saves
80%
Dynaline
saves
66%
Annual
Cost of
$307
Annual
Cost of
$1,600
Annual
Cost of
$896
ELECTRIC
HEAT
$1600 -
$1000 -
$750 -
$500 -
$250 -
$100 -