Sullair 125 - Section 3 SPECIFICATIONS; 3.1 A SPECIFICATIONS - PERKINS AND CATERPILLAR

132 pages

To Next Page

To Previous Page

Section 2

DESCRIPTION

Figure 2-4C Control System with Piping and Instrumentation - 160H Models (John Deere)

Main Page

Parts List1
Table of Contents3
General7
Towing7
Pressure Release9
Fire and Explosion10
Moving Parts11
Hot Surfaces, Sharp Edges and Sharp Corners12
Toxic and Irritating Substances12
Electrical Shock12
Lifting13
Entrapment13
Jump Starting13
Introduction15
Description of Components15
Sullair Compressor Unit, Functional Description16
Compressor Cooling and Lubrication System, Functional Description16
Compressor Discharge System, Functional Description16
Control System, Functional Description18
Air Inlet System, Functional Description22
Instrument Panel Group, Functional Description22
Electrical System, Functional Description24
Shutdown System, Functional Description24
A Specifications - Perkins and Caterpillar27
B Specifications - John Deere28
Lubrication Guide30
Application Guide30
Lubrication Guide - Engine30
General31
Purpose of Controls31
Start-Up Procedure32
Subsequent Start-Up Procedure32
Shutdown Procedure32
General33
Daily Operation33
Maintenance after Initial 50 Hours of Operation33
Maintenance Every 50 Hours33
Maintenance Every 100 Hours33
Maintenance Every 200 Hours33
Maintenance Every 250 Hours33
Maintenance Every 500 Hours34
Maintenance Annually or Every 1500 Hours34
Maintenance Every Year or 12,000 Miles34
Parts Replacement and Adjustment Procedures34
Compressor Fluid Change Procedure34
Air Filter Maintenance34
Separator Element Replacement35
Procedure for Setting Speed and Pressure35
Operating Adjustments37
Bearing Lubrication37
Troubleshooting Introduction38
Troubleshooting Guide38
Noise Emissions Warranty41
Noise Emissions Maintenance and Maintenance Record Log41
Deere Model 160H56
Deere Model 160H57
Deere Model 160H58
Deere Model 160H59
Radiator and Compressor Fluid Cooling System64
All Models65
All Models66
All Models67
Frame, Running Gear and Parts - All Models68
Except John Deere 160H72
Except John Deere 160H73
Except John Deere 160H74
Except John Deere 160H75
Model 160H76
Model 160H77
Model 160H78
Model 160H79
John Deere Model 160H80
John Deere Model 160H81
Fuel Tank and Parts - All Models84
Canopy, Acoustical Panels and Parts86
All Models87
Instrument Panel, Panel Door and Mounting88
Parts - All Models89
Caterpillar / Perkins Models 125, 130, 18590
Caterpillar / Perkins Models 125, 130, 18591
Model 160H (Standard Gauge92
Model 160H (Standard Gauge93
And Perkins (Australian) Models 130-18594
And Perkins (Australian) Models 130-18595
Full Gauge96
Full Gauge97
Single Hose Reel Option - All Models100
Dual Hose Reel Option- All Models102
A One Pint Oiler Option- All Models106
B One Quart Oiler / Moisture Separator Option108
Decals110
Decal Locations - All Models122
Canadian Tail / Clearance Lights - All Models126
Drawbar Installation - Standard128

Sullair 125 - Section 3 SPECIFICATIONS; 3.1 A SPECIFICATIONS - PERKINS AND CATERPILLAR

Table of Contents

Other manuals for Sullair 125

Related product manuals