Section 7
ILLUSTRATIONS AND PARTS
83
7.13B INLET VALVE PARTS - 8” - 1150XH AND 1350XH
key part
number description number quantity
1 housing, body 8” inlet valve 250042-276 1
2 cover, assembly 8” inlet valve 02250048-491 1
3 plate, flow control 8” inlet valve 250042-297 1
4 cover, inter 8” inlet valve 250042-301 1
5 piston, 8” inlet valve 250042-299 1
6 spring, comp 144 lbs inter 250042-384 1
7 shaft, 8” inlet valve 02250139-188 1
8 spring, comp 109 lbs outer 250042-383 1
9 spring, comp 2.61 lbs 250042-656 1
10 capscr, hx gr. 5 1/4-20 x 3/4 828604-075 1
11 washer, springlock reg. 1/4 837504-062 1
12 o-ring, viton 4 5/8 x 1/4 826502-426 1
13 o-ring, viton 1 x 1/8 826502-214 1
14 screw, ferry hd,3/8-16 x 13/4 lg 828406-175 18
15 plug, pip e 1/4 -1 8 npt; stl 3000# 807800-010 1
16 orifice, .093 x .125m x .125f 250014-060 1
For maintenance on 8” inlet valve assembly no. 02250045-626, order repair kit no. 02250112-531,
and replacement gasket no. 040422 (refer to key number 5 of Section 7.12B).
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR
NOTE
To Next Page
Loading...
