Sullair 20/12 Series User Manual

Section 3
SPECIFICATIONS
13
3.1 SPECIFICATIONS
DIMENSIONS WITHOUT ENCLOSURE
Model Series Length Width Height Weight
in
mm
in
mm
in
mm
lb
kg
20/12 500 CFM 143.5
3645
64
1626
71.5
1816
6000
2722
20/12 630 CFM 143.5
3645
64
1626
71.5
1816
6000
2722
20/12 750 CFM 143.5
3645
64
1626
71.5
1816
6000
2722
20/12 800 CFM 186
4724
82
2083
80.5
2045
9400
4264
20/12 960 CFM 186
4724
82
2083
80.5
2045
9600
4354
COMPRESSOR:
T ype 2--Stage Oil Flooded Rotary
Maximum Full Load Operating Pressure 350 PSIG (2413kPa)
Bearing T ype Anti--Friction
Cooling Pressurized Compressor Fluid
Lubricant Sullube 32
Sump Capacity 35 U.S. Gallons (132 Liters)
Control Electro--Pneumatic
MOTOR:
T ype O.D.P., 460V, A.C., Three Phase, 60 Cycles
Size See Model Series above.
Speed 1200 RPM and 1800 RPM
3.2 LUBRICATION GUIDE
Sullair standard compressors are filled with Sullube
32 fluid as factory fill.
MIXING OF OTHER FLUIDS
WIT HI N THE COMPRESSOR WILL VOID ALL
W ARRANTIES.
Sullube 32 fluid should be changed every 1800
hours or once a year, whichever comes first. The
fluid should be changed more frequently under se-
vere operating conditions, such as high ambient
temperatures coupled with high humidity, or when
high particulate level, corrosive gases or strong oxi-
dizing gases are present in the air .
Maintenance of all other components is still recom-
mended as indicated in the Operator’s manual.
Sullair encourages the user to participate in a fluid
analysis program with the fluid suppliers. This could
result in a fluid change interval differing from that
stated in this manual. Contact your Sullair Repre-
sentative for details.

Sullair 20/12 Series Specifications

General

Brand	Sullair
Model	20/12 Series
Category	Air Compressor
Language	English