Sullair 260 CFM User Manual

TABLE OF CONTENTS
Section 4
OPERATION 25 4.1 GENERAL
25 4.2 PURPOSE OF CONTROLS
26 4.3 START --- UP PROCEDURE
26 4.4 SUBSEQUENT START--- UP PROCEDURE
26 4.5 SHUTDOWN PROCEDURE
Section 5
MAINTENANCE 27 5.1 GENERAL
27 5.2 DAILY OPERATION
27 5.3 MAINTENANCE AFTER INITIAL 50 HOURS
OF OPERATION
27 5.3A MAINTENANCE EVERY 50 HOURS
27 5.4 MAINTENANCE EVERY 100 HOURS
27 5.5 MAINTENANCE EVERY 250 HOURS
28 5.6A MAI NTENANCE EVERY 1500 HOURS OR ANUALLY
28 5.6B MAINTENANCE EVERY YEAR OR 12,000 MILES
28 5.7 PARTS REPLACEMENT AND ADJUSTMENT PROCEDURES
28 COMPRESSOR FLUID C HANGE PROCEDURE
28 COMPRESSOR FLUID FIL TER ELEMENT REPLACEMENT
28 AIR FILTER MAINTENANCE
29 SPEARATOR ELEMENT REPLACEMENT
29 PROCEDURE FOR SET TING SPEED AND PRESSURE CONTROLS
ON PORTABLE COMPRESSOR WITH POPPET VALVE
31 BEARING LUBRICATIO N
31 5.8 TROUBLESHOOTING --- INTRODUCTION
32 5.9 TROUBLESHOOTING --- GUIDE
Section 6
NOISE CONTROL 37 6.1 NOISE EMISSIONS WARRANTY
37 6.2 TAMPERING WITH NOISE CONTROL
SYSTEM PROHIBITED
37 6.3 NOISE EMISSIONS MAINTENANCE AND
MAINTENANCE RECORD LOG
Section 7
ILLUSTRATIONS AND
PARTS LIST 41 7.1 PROCEDURE FOR ORDERIN G PARTS
42 7.2 RECOMMENDED SPARE PARTS LIST
44 7.3A ENGINE, COMPRESSOR & PARTS--- 185H & 210H CATERPILLAR
48 7.3B ENGINE, COMPRESSOR & PARTS--- 260 CATERPILLAR
52 7.3C ENGINE, COMPRESSOR & P ARTS--- 185H & 210H JOHN DEERE
56 7.3D ENGINE, COMPRESSOR & PARTS--- 260 JOHN DEERE
60 7.4A AIR INLET AND EXHAUST --- ALL CATERPILLAR MODELS
62 7.4B AIR INLET AND EXHAUST --- ALL JOHN DEERE MODELS

Sullair 260 CFM Specifications

General

Brand	Sullair
Model	260 CFM
Category	Air Compressor
Language	English