Section 6
NOISE CONTROL
39
4. ANNUAL FRAME, CANOPY, AND PARTS INSPECTION
At least annually inspect frame, canopy a nd parts, for security of attachment. Make sure there are not any
missing or deformed members, including all hinged doors, covers and their fastening devices. DO NOT
operate compressor with defective frame, canopy and parts. Remove and replace defective parts by order-
ing with part numbers indicated in Parts List.
Maintenance
Performed
By
Location
Date
Maintenance
Performed
By
Location
Date
DDDDDDDDDDDDDDDDD
5. ANNUAL ACOUSTICAL MATERIALS INSPECTION
At least annually inspect all acoustical materials, if any, for security of attachment. Make sure that there is not
any material missing or damaged (refer to Parts List). Clean or replace, if necessary. DO NOT operate com-
pressor with defective acoustical material. Remove and replace defective parts by ordering with part num-
bers indicated in the Parts List.
Maintenance
Performed
By
Location
Date
Maintenance
Performed
By
Location
Date
DDDDDDDDDDDDDDDDD
To Next Page
Loading...
