Sullair 260 CFM - Page 65

Section 7
ILLUSTRATIONS AND PARTS LIST
59
7.3D ENGINE, COMPRESSOR & PARTS -- 260 JOHN DEERE (continued)
key part
number description number quantity
29 housing, adapter (250034---402c) 250034---403 1
30 bushing, taper wood---sd 1.75 250034---920 1
31 coupling, eng---compr lord 250 (IV) 250034---921 1
32 pin, drive coupling 250 jd 250035---041 8
33 elbow, 90d 1/4” tube x 1/4”fnpt 250041---287 1
34 nut, hex pltd 1/4---20 825204---226 1
35 nut, hex locking 1/4---20 825504---145 1
36 nut, hex locking 1/2---13 825508---262 4
37 o---ring, neoprene 3 1/2 x 1/8” 826202---238 1
38 capscrew, hex 8.8 m8 x 20mm 828008---020 3
39 capscrew, hex 8.8 m8 x 120mm 828008---120 4
40 capscrew, hex 8.8 m10 x 35mm 828010---035 12
41 capscrew, hex 8.8 m16 x 30mm 828016---030 4
42 capscrew, hex gr5 1/4---20 x 1 829104---100 1
43 capscrew, hex gr5 1/2---13 x 1 829108---100 14
44 capscrew, hex gr5 1/2---13 x 1 1/4 829108---125 4
45 capscrew, hex gr5 1/2---13 x 3 1/4 829108---325 4
46 capscrew, hex gr5 5/8---11 x 1 1/4 829110---125 4
47 washer, spr lock reg pltd 1/2 837808---125 8
48 washer, spr lock reg pltd 5/8 837810---156 4
49 washer, pl---b reg pltd 5/16 838205---071 3
50 washer, pl---b reg pltd 1/2 838208---112 4
51 washer, spr lock---metric pltd m8 838808---200 6
52 washer, spr lock---metric pltd m10 838810---220 12
53 hose, heater 5/8 842115---062 1 ft
54 nut, hex jam lh pltd 1/4---28 866604---164 1
55 plug, pipe 1/8” 3000# s tl plt 866900---005 1
56 capscrew, ferry head hd pltd 1/4---20 x 1 867304---100 1
57 capscrew, ferry head hd pltd 1/4---20 x 1 1/2 867304---150 1
58 capscrew, ferry head hd pltd 3/8---16 x 1 1/2 867306---150 8
59 nut, hex jam rh pltd 1/4---28 868204---164 1
60 nut, hex jam rh pltd 5/16---24 868205---195 1
61 connector, 90d str x jic 1 7/8 x 1 7/8 870624---024 1
62 washer, nord---lock pl 5/8” 878610---100 4
(IV) For maintenance on coupling, order repair kit no. 02250099---930.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR