Sullair 300HH - Page 48

300HH, 375, 375H, 375HH, 425 AND 425H USER MANUAL R00 SECTION 2
46
10. Press the ENTER key to change the
selected parameter in the quadrant to the
new parameter.
11. Use the Menu key to return to the SETUP 4-
UP DISPLAY screen.
12. The selected quadrant has now changed to
the new selected parameter.
13. Repeat the parameter selection process until
all spaces are as desired.
14. Press the Menu key to return to the Main
Menu.
15. Press the Menu key to exit the Main Menu
and return to the engine parameter display.
Enter Selected Parameter
PV101 SU_0000564
ENGINE OIL PRESSURE
3
4
FUEL RATE
INTAKE TEMPERATURE
BATTERY POTENTIAL VOLTAGE
ENGINE DESIRED OP SPEED
MACHINE HOURS
Figure 2-87
Return to 4-Up Custom Setup
PV101 SU_0000565
Note the number to the right
of the selected parameter
indicating that the parameter
is now assigned to that
display location.
ENGINE OIL PRESSURE
3
4
FUEL RATE
INTAKE TEMPERATURE
BATTERY POTENTIAL VOLTAGE
ENGINE DESIRED OP SPEED
MACHINE HOURS
Figure 2-88
4-Up Display
PV101 SU_0000566
1000 RPM
ENG RPM
57 PSI
57 F
COOL TEMP
0.0 G/HR
FUEL RATE
OIL PRES
Figure 2-89
Return to Main Menu
PV101 SU_0000567
1000 RPM
ENG RPM
57 PSI
57 F
COOL TEMP
0.0 G/HR
FUEL RATE
OIL PRES
Figure 2-90
Select Remaining Parameters
PV101 SU_0000568
SETUP 1-UP DISPLAY
SETUP 4-UP DISPLAY
SELECT UNITS
ADJUST BACKLIGHT
ADJUST CONTRAST
UTILITIES
1000 RPM
ENG RPM
57 PSI
57 F
COOL TEMP
0.0 G/HR
FUEL RATE
OIL PRES
Figure 2-91