EasyManua.ls Logo

Sullair 300HH - 3.2 Model Specifications

Sullair 300HH
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
300HH, 375, 375H, 375HH, 425 AND 425H USER MANUAL R00 SECTION 3
56
3.3 LUBRICATION GUIDE— COMPRESSOR
3.4 APPLICATION GUIDE
Sullair air compressors are supplied with Sullair AWF
which is a heavy duty multi-viscosity, all weather fluid
which provides an extended change interval when
compared to other fluids. Detergent motor oils (SAE
10W Class SE, SF, SG, or CD) can also be used.
Any of these oils are suitable under conditions where
severe oil oxidation can occur.
Water must be drained from the receiver tank
periodically. In high ambient temperature and
humidity conditions, condensed moisture can
emulsify with the oil forming a “milky” color. SAE
10W is especially prone to this condition. The fluid
should be changed if this condition develops. DO
NOT mix different fluids. Combinations of different
fluids can lead to operational problems such as
foaming, plugged filters, blocked orifices or lines.
When ambient conditions exceed the recommended
ranges, or if other conditions warrant the use of other
extended life lubricants, contact your local Sullair
representative for recommendations.
Sullair encourages users to participate in a fluid
analysis program. The analysis might indicate a need
for change intervals different from those
recommended in this manual. Sullair Corporation
offers a fluid analysis for Sullair AWF. Contact Sullair
for details.
D-A Lubricant® Company Inc. offers an analysis for
users of Sullair AWF. Contact your Sullair
representative for details.
Table 3-6: Engine Specifcations
Engine 375HH 425 425H
Type Diesel Diesel Diesel
Make John Deere John Deere John Deere
Model JD4045HF285 JD4045HF285 JD4045HF285
Displacement 275 cu/in (4.5L) 275 cu/in (4.5L) 275 cu/in (4.5L)
Cylinders 4 4 4
Bore x Stroke
4.19 x 5.00
(106 mm x 127 mm)
4.19 x 5.00
(106 mm x 127 mm)
4.19 x 5.00
(106 mm x 127 mm)
Rated Speed 2200 rpm 2200 rpm 2200 rpm
Rated Power 140HP/104kW 140HP/104kW 140HP/104kW
Type of Motor Oil
See Engine Operator
Manual
See Engine Operator
Manual
See Engine Operator
Manual
Fuel Tank Capacity
56 gallons
(212 liters)
56 gallons
(212 liters)
56 gallons
(212 liters)
Radiator Capacity 4 gallons (15 liters) 4 gallons (15 liters) 4 gallons (15 liters)
Engine Water Temperature Shutdown 230°F (110°C) Shutdown 230°F (110°C) Shutdown 230°F (110°C)
Minimum Idle Speed 1600 rpm (II) 1600 rpm (II) 1600 rpm (II)
Alternator Rating 65 amp 65 amp 65 amp
(II) DO NOT allow engine idle rpm to drop below minimum idle speed. Compressor and/or coupling damage will
occur. The compressor is equipped with a Low Speed Shutdown System that will shutdown the compressor if engine
speed falls below 1500 rpm.
FLUID TYPE CHANGE PERIOD/HOURS
AMBIENT TEMPERATURE
RANGE °F (°C)
Sullair AWF (I) 1500 -20 to 120 (-29 to 49)
SAE 10W SE, SF, SG, CD 250 0 to 100 (-18 to 38)
MIL-L-2104E 10W 250 0 to 100 (-18 to 38)
(l) Sullair part numbers for Sullair AWF are 250030-757 (5 gallons/18.9 liters) and 250030-758 (55 gallon drum/280
liters)

Other manuals for Sullair 300HH

Related product manuals