83
375 John Deere Standard and Aftercooled/Filtered Operator’s Manual and Parts List
ILLUSTRATIONS AND PARTS LIST
7.3 ENGINE, COMPRESSOR AND PARTS (CONTINUED)
Key Description Part Number Note Quantity
46 capscrew, hex 8.8 m10 x 90mm 828010-090 4
47 capscrew, hex 8.8 m12 x 30mm 828012-030 6
48 capscrew, hex gr5 3/8-16 x 1 829106-100 8
49 capscrew, hex gr5 3/8-16 x 1 1/4 829106-125 (IV) 8
50 capscrew, hex gr5 1/2-13 x 1 829108-100 10
51 capscrew, hex gr5 1/2-13 x 1 1/2 829108-150 4
52 capscrew, hex gr5 1/2-13 x 4 829108-400 2
53 capscrew, hex gr5 5/8-11 x 3 1/2 829110-350 2
54 screw, hex ser washer 1/4-20 x 3/4 829704-075 1
55 screw, hex ser washer 5/16-18 x 3/4 829705-075 1
56 washer, spr lock reg pltd 3/8 837806-094 8
57 washer, spr lock reg pltd 1/2 837808-125 6
58 washer, pl-b reg pltd 5/8 838210-112 2
59 washer, spr lock-metric pltd m10 838810-220 16
60 washer, spr lock-metric pltd m12 838812-250 6
61 hose, heater 1/2" (ft) 842115-050 3
62 washer, metric-iso7089- 10 865410-210 12
63 bushing, red pltd 1/4 x 1/8 867100-005 1
64 engine JD4045HF285 375-425 T3 CONSULT FACTORY 1
65 unit,16 series 375 CONSULT FACTORY 1
(I) 375 and 425 models
(II) 300HH, 375H, 375HH and 425H models
(III) 375 model only
(IV) 300HH, 375H, 375HH, 425 AND 425H models
To Next Page
Loading...
