Sullair LS-10 25HP - Lubrication Change Recommendations and Maintenance

Section 3
SPECIFICATIONS
15
3.4 LUBRICATION CHANGE RECOMMENDATIONS AND MAINTENANCE
LUBRICANT
FLUID CH ANGE
SEPARATOR CHANGE
B--4,000 Hours or more frequently if conditions so require.
FLUID FILTER CHANGE
C--When measured pressure loss exceeds 20 psig (1.3 bar).
D--When measured pressure loss exceeds 10 psig (0.7 bar).
E--When required by fluid analysis or known contamination.
F--Does not require replacement during normal service conditions.
A--8,000 Hours or once a year.
G--Every 1000 hours.
Sullube 32 A,E G,C A,D
Sullair LLL--4--32 A,E G,C A,D
SRF 1/4000 B,E G,C B,D
24KT F,E G,C A,D
CP--4600--32--F B,E G,C B,D