Section 8
ILLUSTRATIONS AND PARTS LIST
53
8.5 AIR INLET SYSTEM
key part
number description number quantity
1 filter, air inlet heavy duty (25, 30HP) (I) 02250107---327 1
•filter, air inlet heavy duty (40HP) (II) 040595 1
2 indicator, maintenance 045757 1
3 band, mounting---inlet filter (25, 30HP) 043370 1
•band, mounting---inlet filter (40HP) 040598 1
4 clamp, inlet elbow 250018---550 1
5 screw, ser washer 5/16”---18 x 3/4” 829705---075 2
6 connector, 1/4”tube x 1/8”npt 250018---427 1
7 tubing, nylon 1/4” black 02250054---861 ---
8 support, filter heavy dut y 02250100---529 1
9 nut, hex flanged plated 5/16”---18 825305---283 2
10 elbow, rubber 90˚ red 2---1/2” x 3” (25, 30HP) 250032---462 1
•elbow, rubber 90˚ 3” (40HP) 040599 1
11 capscrew, hex gr5 5/8”---11 x 1---1/2” 829110---150 4
12 washer, springlock reg plated 5/8” 837810---156 4
13 valve, inlet control (III) 02250088---348 1
14 elbow, 1/4”tube x 1/4”npt 250018---430 1
15 o---ring, viton 826502---238 1
16 support, filter heavy duty 02250100---528 1
17 capscrew, hex gr5 5/16”---18 x 1---3/4” 829105---175 1
18 nut, hex flanged plated 5/16”---18 825305---283 1
19 lug, scrulug---ground 849215---025 1
20 capscrew, hex gr5 3/8”---16 x 1---3/4” 829106---175 1
21 washer, springlock reg plated 3/8” 837806---094 1
22 nut, hex plated 3/8”---16 825206---337 1
23 capscrew, hex gr5 3/8”---16 x 1---1/2” 829106---150 2
24 washer, springlock reg plated 3/8” 837806---094 2
25 nut, hex plated 3/8”---16 825206---337 2
26 clamp, inlet elbow (25, 30HP) 040083 1
Sclamp, inlet elbow (40HP) 250018---550 1
(I) For maintenance on air filter no. 02250107---327, order replacement element no. 043334.
(II) For maintenan ce on air filter no. 040595, order replacement element no. 040596.
(III) For maintenance on air inlet valve no. 02250088---348, order repair kit no. 250019---451, and/or repa ir kit
for springs no. 250029---315.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
