Sullair LS-10 25HP - Page 69

Section 8
ILLUSTRATIONS AND PARTS LIST
63
8.8 CONTROL SYSTEM AND ELECTRICAL PARTS
key part
number description number quantity
1 tee, tube 1/4” male branch 250028---582 1
2 tubing, nylon 1/4” black 0225054---861 ---
3 strainer, v---type 300 psi x 1/4” npt (I) 241771 1
4 tee, pipe 1/4” male npt 869825---025 2
5 connector, 1/4” tube x 1/4” female npt 250041---084 1
6 nut, hex plated #10---24 825202---130 2
7 washer, springlock reg plated #10 837802---047 2
8 support, bracket pneuma tic cntrls 02250104---420 1
9 screw, machine---round #10---24 x 1/2” 831602---050 2
10 bulkhead, pipe 1/4” npt 841500---025 1
11 elbow, 90˚ conduit 1/4 846600---050 1
12 conduit, csa flex 1/2” 846315---050 0.4 ft.
13 nipple, ipe 1/4” hex 868504---025 1
14 elbow, 1/4” tube x 1/4” npt 250018---430 4
15 valve, shuttle 1/4” npt 408893 1
16 valve, pressure regulator (II) 250017---280 1
17 orifice, .040 x 1/4” fnpt x 1/4” mnpt 02250091---395 1
18 switch, pressure (<= 140 psi/ 9.7 bar) 040694 1
Sswitch, pressure (< 140 psi/ 9.7 bar) 407778 1
19 tee, tube 1/4” male run 250038---059 2
20 support, bracket strtr box ls 10 lh 02250106---969 1
21 nut, hex flanged plated 5/16”---18 825305---283 4
22 support, bracket strtr box ls 10 rh 02250104---194 1
23 elbow, 45˚ conduit 1/2” 846500---050 1
24 locknut, conduit seal N4 1/2” 02250071---362 1
25 valve, solenoid 1/4” 3---way
(<= 140 psi/ 9.7 bar) (III) 250038---674 1
Svalve, solenoid 1/4” 3 --- way
(> 140 psi/ 9.7 bar) (IV) 250038---675 1
26 elbow, 45˚conduit1/2” 846500---050 1
27 nipple, chase 1/2” 847815---050 1
28 box, electrical strtr ls 10 consult factory 1
(Continued on page 65)
(I) For maintenance on strainer no. 241771, order repair k it no. 241772.
(II) For maintenance on pressure regulator valve no. 250017---280, order repair kit no. 250019---453.
(III) For maintenance on solenoid valve no. 250038---674, order repair kit no. 250038---673, and replacement
coil no. 250031---772.
(IV) For maintenance on solenoid valve no. 250038---675, order repair kit no. 02250055---939, and replace-
ment coil no. 250038---730.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR