8.4 AIR INLET SYSTEM
key part
number description number quantity
1 tube, alum air inlet 8”od x 5”lg 02250043-705 2
2 washer, sprlock hi clr 5/16” 02250112-561 2
3 sub assembly, cntrl sullicon w/lht spr lp (I) 02250118-172 1
4 valve, 10” inl btfly TS32A 02250126-220 1
5 adapter, TS32SC air inlet 02250129-113 1
6 orifice, cap .031” x 1/4” npt 02250132-934 1
7 support, air filter LS32S-400a lp 02250141-039 1
8 support, air flt strap LS32S 40psi 02250141-087 2
9 rod, link compressor 029910 1
10 rod end, spherical rh 5/16 040136 1
11 gasket, .06 x 10.5id x 13.25od 041079 2
12 rod end, spheical lh 5/16 042004 1
13 clamp, t-bolt ss band 8.75”id 043598 8
14 hose, hump 8 x 8” 044733 2
15 elbow, rubber 8” x 45 degrees 250005-776 2
16 filter, 18” dia air (II) 250006-718 2
17 cap, air inlet 10” 250007-712 2
18 bracket, ctl mtg 32/25 250014-397 1
19 lever, inl vlv(3/4”shft)adj 250019-036 1
20 connector, tube-strt 1/4mnpt x1/4”t 250024-685 1
21 connector, tube-f 1/4 x 1/4 810104-025 1
22 nut, hex pltd 3/8-16 825206-337 1
23 nut, hex f pltd 5/16-18 825305-283 12
24 capscr, hex gr5 3/8-16 x 1 829106-100 2
25 capscr, hex gr5 3/8-16 x 1 3/4 829106-175 1
26 capscr, hex gr5 7/8-9 x 2 829114-200 1
27 capscr, hex gr5 7/8-9 x 4 829114-400 8
28 screw, hex ser washer 5/16-18 x 3/4 829705-075 8
29 screw, hex ser washer 5/16-18 x 1 829705-100 2
30 washer, spr lock reg pltd 3/8 837806-094 3
(Continued on page 61)
(I) For details of the Sullicon Control, consult Section 8.9, Sullicon Control.
(II) For maintenance on air filter no. 250006-718, order replacement element no. 02250135-149.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
Section 8
ILLUSTRATIONS AND PARTS LIST
59
To Next Page
Loading...
