8.8 SUMP AND PARTS
key part
number description number quantity
1 connector, flex 1/4t x 1/4p 020169 2
2 plug, sight glass 1-7/8” sae 02250097-611 2
3 connector, tube male bhd 1/4 x sae 02250101-490 1
4 filter, asembly genisis filter (I) 02250117-782 2
5 valve, ball 3/4”sae x 3/4”npt 02250125-221 1
6 orifice, plug brass 1/8”npt x 1/32” 02250125-774 1
7 orifice, plug brass 1/8”npt x 3/32” 02250125-776 1
8 sightglass, orf block sae 02250126-129 2
9 element, sep/pri (II) 02250126-325 1
10 element, sep/sec (II) 02250126-331 1
11 boom, lid lifting 02250127-249 1
12 tank, oil sep 36” dia. 02250129-137 1
13 valve, relief 2” 160# soft seat 02250132-162 1
14 support, oil rtn sightgl TS32S-400/600 02250137-560 1
15 joint, expansion TS32S rectnk to unit 6” ac/w 02250137-600 1
16 tube, tank drn LS32 lp 02250141-365 1
17 plug, o-ring boss sae 1 1/4 040029 2
18 gasket, 6” 125# flg full face 242437-012 2
19 connector, tube-f 1/4 x 1/4 810104-025 1
20 connector, tube-m 1/4 x 1/4 810204-025 1
21 elbow, tube str thrd 3/4 x 1 1/16 811612-106 2
22 connector, tube str thd 1/4 x 7/16 811804-044 1
23 nut, hex pltd 3/4-10 825212-665 12
24 capscr, hex gr5 1/2-13 x 2 3/4 829108-275 2
25 capscr, hex gr5 3/4-10 x 2 1/2 829112-250 12
26 capscr, hex gr5 3/4-10 x 3 1/2 829112-350 8
27 washer, spr lock reg pltd 3/4 837812-188 12
28 washer, pl-b reg pltd 1/2 838208-112 2
29 washer, pl-b reg pltd 3/4 838212-112 16
(Continued on page 77)
(I) For maintenance on assembly filter no. 02250117-782, order replacement filter no. 0250117-782.
(II) For maintenance on separator elements, order (primary) replacement element no.02250126-352, and
(secondary) replacement element no. 02250126-355.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
Section 8
ILLUSTRATIONS AND PARTS LIST
75
To Next Page
Loading...
