Sullair SUPERVISOR CONTROLLER User Manual

SUPERVISOR CONTROLLER™ USER MANUAL SECTION 6
46
6.12 CLEANING VSD HEAT SINK
FILTERS
If the machine is equipped with a VSD filter, it will
require maintenance as needed in order to keep the
VSD running at optimal temperatures. Below are
instructions on how to care for the VSD filter.
VSD FILTER CLEANING
1. Locate the VSD filter from the following fig-
ures.
2. Remove the filter from the assembly.
(The filters are magnetic and should pull off
easily.)
3. With a water hose, spray the filter from the
magnet side.
4. Let the filter thoroughly dry.
5. Replace filter on the VSD assembly.
VSD FILTER V200S
FILTER DRAWING ASSEMBLY
FILTER ENCLOSURE
FILTER ELEMENT
WEATHER STRIPPING
Figure 6-1: V200S SZ8

Sullair SUPERVISOR CONTROLLER Specifications

General

Brand	Sullair
Model	SUPERVISOR CONTROLLER
Category	Controller
Language	English