Sullair SUPERVISOR CONTROLLER Instruction Manual

Sullair SUPERVISOR CONTROLLER

37 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SUPERVISOR

CONTROLLER™

and WS CONTROLLER

SEQUENCING & PROTOCOL MANUAL

(Including Supervisor II Deluxe Controller™)

INSTRUCTION

MANUAL

Part Number

02250161-162

©Sullair Corporation

KEEP FOR

FUTURE

REFERENCE

Table of Contents

Other manuals for Sullair SUPERVISOR CONTROLLER

User Manual52 pages

Questions and Answers:

G
George FieldsAug 13, 2025
What to do if the Sullair SUPERVISOR Controller shows 'Main Motor Overload'?
- R
  rileybrookeAug 13, 2025
  If the Sullair Controller displays a 'Main Motor Overload' error, reset the overload after the heater element cools down. Also, ensure the compressor is properly configured and the load pressure is set below the compressor's limit. Check the motor starter contacts for proper operation and verify the line voltage, consulting the power company if it's low.
R
Ronald ShermanAug 17, 2025
How to troubleshoot 'Aux Motor Overload' on a Sullair SUPERVISOR?
- D
  Daniel CamposAug 17, 2025
  If you encounter an 'Aux Motor Overload' on your Sullair Controller, reset the auxiliary overload after the heater element cools. Verify the correct motor amps and check for loose connections. Additionally, inspect the motor starter contact for proper operation and check the line voltage, consulting the power company if it is low.

Sullair SUPERVISOR CONTROLLER Specifications

General

Brand	Sullair
Model	SUPERVISOR CONTROLLER
Category	Controller
Language	English

Related product manuals

Preview: SUPERVISOR CONTROLLER Series

SUPERVISOR CONTROLLER Series

Supervisor II Deluxe Controller

Sullair Supervisor II

Sullair WS CONTROLLER

Sullair 02250160-842

Sullair 02250165-411 R01