SECTION 7 WSPC USER INTERFACE MANUAL
57
WARNING HISTORY WINDOW
A history of the 16 most recent Warning messages
may be viewed in the “Warning History” window. See
Figure 7-8.
1. To access the “Warning History” window,
click the “Warning History” button on the
“Maintenance” display.
2. The “Warning History” window will appear
displaying the following elements:
a. Top row header: Displays abbreviated
headings corresponding to warnings that
may appear on WS Controller display
panel. These are broken into a com-
pressor and dryer group - select with the
tabs. Also along the top row are head-
ings for the machine “hours”, “date”, and
“time” of the warning occurrence.
b. Columns: Boxes below each warning
heading will change from shaded gold to
bright gold when a warning is indicated.
c. Rows: The most recent warnings are
indicated on the first row below the
headings. Each preceding warning is
indicated chronologically down the table
column.
3. Close the table by clicking the “Close” but-
ton.
Warning history is also included in the
comprehensive text report. See Section 5.2.
“Reset All” must be clicked to
allow service interval change to
become effective.
Figure 7-7: Maintenance Display – Admin Level
To Next Page
Loading...