SECTION 5 WSPC USER INTERFACE MANUAL
43
an individual name, group name, machine,
etc.
4. Make changes to the preferences in the pro-
file window as necessary. Edit a Profile
details the steps to entering profile prefer-
ences.
5. When the profile information has been com-
pleted, click “Saved Copied Profile” to save
the profile.
6. Click the “close window button” in the upper
right corner of the window to exit the User
Profiles window. The edited profile will not
become the active profile until it has been
activated selecting the desired profile at the
“Enter Password” box. Refer to Activate a
Profile.
ACTIVATE A PROFILE
A profile can be made active using the “Profiles”
option. To activate a profile:
1. Click “File” on the menu bar.
2. Select “Login”.
3. The “Enter Password” box will be presented.
See Figure 5-5. At the User Name field, click
the down arrow to display a list of available
profiles.
4. Click on the desired profile from the list pro-
vided. If an Administrator profile is selected,
a password will be required for access.
5. Click “OK” to activate the selected profile.
Clicking “Cancel” will close the WSPC pro-
gram.
5.2 REPORTS
WSPC may be used to generate a comprehensive
report of the controller's setup and machine history.
These reports are small files that may be filed for
future reference, emailed, or pasted into other
documents. They may be viewed with any common
text editor.
CREATE A REPORT
To create a new report for the compressor:
1. Click "Report" on the menu bar. A "Save As"
box will open (Figure 5-6).
2. Select the folder location to save the report.
This is similar to any Windows(c) application.
The large buttons on the left may be used to
start browsing on a computer. The little but-
tons to the right of the "Save in:" box may be
used to browse through folders. The large
box shows other similar documents that are
in the selected folder.
3. Type in the desired File name. This is
"Report.txt" in Figure 5-6. Any Windows(c)-
permitted name may be used, but always
end it in .txt so that it can be automatically
opened later.
4. Click "Save". Messages will appear to
describe the progress.
NOTE
A new profile cannot be given the same
name of an already existing profile.
Figure 5-5: Switch Profile (Password Box)
To Next Page
Loading...