412
OPERATOR WARNING & DUTY
This manual must be available permanently near the baler. Each operator must read and follow
the full instruction of this manual before being authorize.
All operator must absolutely study and fully understand the operator’s manual, specically pay
a particular attention to the safety procedure section.
In case of misunderstanding or doubt, do not start the machine. Contact support service.
Operators and service sta must comply by wearing personal protective equipment (PPE)
before using or performing any maintenance operation following rule and regulation code.
Operator and service personal must be trained during the commissioning on the baler
operation, by a duly authorized person from the manufacturer.
To avoid any mistake or accident, all operators must understand the operator manual.
All operators must absolutely study and fully understand the operator’s manual.
This manual must remain available for any personal involve with the baler.
SAFETY SIGN - In the manual
SAFETY SIGN - On the baler
Warning !
During inspection and
maintenance, servicing and
removal of trapped waste.
Disconnect the power to the
machine by removing the plug
from the wall socket.
Danger High Voltage
Do not ush water
on the baler.
English
To Next Page
Loading...
Need help?
General