614
This symbol means WARNING or DANGER – personal safety instruction!
This machine is designed for ONE-MAN OPERATION.
Only the operator is allowed in the working area of the machine. The working
area is dened under the heading Technical data; Recommended space for
machine in operation.
The machine must not be operated if the safety features (e.g. breakers and
guards) have been deactivated, damaged or removed.
Lost or damaged parts must be replaced with original spare parts.
The machine may only be operated by a person who has received training and
has experience of the machine.
The machine has a high centre of gravity. The press plate must be fully
lowered when the machine is moved. The area immediately around the machine
and its base should be completely level.
Installation, repair and servicing must only be performed by qualied and
competent personnel, and in accordance with the installation and
servicing instructions.
The machine must not be used by minors.
Never climb on the machine!
When compacting plastic, the machine must be set to Plastic (lower press
force), see control panel.
Avoid compacting materials of dierent hardness in the machine at the same
time. (If the waste has not been properly mixed and distributed well in the
chamber, this can result in an uneven load on the press plate and damage to the
machine).
Use only straps or string recommended by the machine manufacturer.
SAFETY FEATURES
The machine is equipped with the following safety eatures: a breaker switch that prevents
the machine from being used when the upper door is open; mechanical door interlocks, and
guards and doors to protect against dangerous intervention in the machine. The machine is
also equipped with an emergency stop. The above safety features must be checked regularly;
see section on weekly inspection and maintenance.
Please read the operating instructions BEFORE operating the machine.
Our warranty/product responsibility requires that:
• instructions are followed, and that no conversion or modication is carried
out.
• original spare parts, and hydraulic oils and lubricants recommended by the
machine manufacturer are used.
• at least one annual service is carried out.
The user of the machine is responsible for the safety checks, and for ensuring that daily
maintenance of the machine is carried out. The user is responsible for seeing to it that
defects are rectied, and that neither the user nor other persons are exposed to danger.
The owner is responsible for ensuring that all laws and instructions are complied with
when using the machine.
English
SAFETY